Tracy Tag - Designed for Android

The TRACY TAG can be disabled to stop it from sharing its location. Once disabled, it will no longer report to Google’s Find Hub network or Apple’s Find My network, and the owner will no longer receive updates on its current location. It will also stop triggering unknown tracker alerts. If you receive a notification on your Android or iOS device indicating that a TRACY TAG has been detected nearby and you are unfamiliar with this device, you can make it ring through the system notification. After locating the device, follow the steps below to disable it.
Disable via Button Press:
locate the button on your TRACY TAG: press the button for 5 seconds firmly to hear a two short beeps will sound; release the button when you hear two short beeps. the TRACY TAG will confirming it is disabled.
Disable via Battery Removal:
disassemble the product into two parts through the gap between the upper cover and the lower cover of the TRACY TAG; carefully remove the battery; connect the TRACY TAG by upper cover and the lower cover, and press tightly.

Re-enable the TRACY TAG:
to re-enable the TRACY TAG, either press the button or reinstall the battery.
- Press the Button: press the button once. When re-enabled, you will hear a beep will sound.
- Replace the Battery: If you removed the battery, place a new CR2032 coin battery inside with the positive side up, and close the device.

Factory Reset and Pairing:
to reset the TRACY TAG to factory settings, press the TRACY TAG button 6 times rapidly, and when you hear a long beep, the device will be reset, release the button. After resetting, you can pair the TRACY TAG with a new Google or Apple account.